Equipment
SpaceMouse Pro is the optimal tool for engineers, designers and architects worldwide to create 3D designs across an increasing variety of industries. Delivering intuitive, effortless, precision 3D navigation in CAD applications, the SpaceMouse Pro experience cannot be reproduced with a standard mouse and keyboard.
- 6 1/2 digit resolution
- 10,000 readings/sec @ 5 1/2 digits to the PC
- LAN, USB & GPIB standard
- Capacitance & temperature measurements
- Data logger for improved usability
- 50,000 reading non-volatile memory
- Designed to comply with LXI Class C specification
- For PILine® Ultrasonic OEM Motors and Positioners
- Accepts Analog Drive Signal from Standard Controller
- Available as Cost-Effective OEM board and Plug-and-Play Desktop Unit
- Control in: Differential, -10 V up to +10 V, polarity controls direction
- Operating voltage: 12 V, ±10 %
- Output power / channel: 120 VPP / 42 VRMS, 210 kHz.
• Two cells (K=0.1, K=1)
• Standard solution 84 uS 500 ml
• Simultaneous display of conductivity or TDS and temperature
• Automatic selection of range for best resolution
• Calibration by cell constant or standard solutions
• Automatic standard recognition
• Storage of up to 32 results
• Bi-directional RS232 link to printer or PC
- Eight single-ended 14-bit analog input channels
- Eight 14-bit analog output channels
- Fast conversion rate
- 8 digital inputs, 8 digital outputs
- Four quadrature encoder inputs (single ended or differential)
- Four counters/timers
- Low power consumption
- Driver for Real Time Toolbox for MATLAB included
- Driver for Real-Time Windows Target
- Driver for xPC Target
- Driver for Windows, 32 and 64-bit applications
3 pieces available.
A high performance 4 Channels 1GHz 16Bit fully arbitrary waveform generator. Up tp 32 channels@1GS/s with AT-XSS expansion bus.
Max. voltage 1.25kV
Max. current 20 mA
Power 25 W
The IM3570, which serves as both an LCR meter and an impedance analyzer, can generate pass/fail judgments on the resonance condition using its frequency sweep measurement and peak comparator functions, and also conduct continuous inspections under different conditions including pass/fail decisions via 1 kHz and 120 Hz LCR testing. In this way, it is possible to make both frequency sweep measurement and LCR measurement with a single instrument.
The Kvaser Leaf Light HS v2 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and 9-pin D-SUB connector, the Leaf Light HS v2's sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Now with galvanic isolation as standard.
Kvaser Memorator Pro 2xHS v2 is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation.
Connected to a PC with USB2.0, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder.
Configurable using Kvaser's Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant.
- Smallest Translation Stages with Linear Motor Drive
- Travel Ranges to 20 mm
- Max. Velocity 500 mm/s
- Acceleration to 5 g
- Incremental Motion to 50 nm
- Self Locking at Rest
- XY-Combination Possible
- MTBF 20.000 h
- Vacuum Versions to 10-7 hP
8 Digit FND Display for Frequency, Frequency Output : 0.2Hz to 10MHz, Sine, Squre, Triangle, Ramp, Pulse, TTL Level, Skewed Sine, Variable Symmetry, Amplitude, Sweep Width and DC Offset, Built-in Frequency Counter, Channel A: 1Hz to 20MHz, Channel B: 20MHz to 2.7GHZ, Frequency Range 0.2Hz to 10MHz, Output Impedence 50Ω Fixed, Output Amplitude 2Vpp to 20Vpp at OpenLoad, 1Vpp to 10Vpp at 50Ω Load, VCF Voltage Level: 0 to 10 VDC, Attenuator: -20dB.
60 MHz analog bandwidth, 1 GS/s sampling rate, 2.5k point record length, 2 channels.
- Highest CPU performance up to 3.60GHz GHz (Intel Core 2 Duo and Intel i5)
- Leverages xPC Target multi-core support
- Room for up to 17 I/O modules using Performance-IOExpansion options
- Light-weight and space-effective aluminum chassis with high-grade EMI sealing
- Ideal for desktop use and rack mounting
- All I/O and peripheral connectors accessible from the front
- Effective low-noise cooling concept
- High-end fan-less (0dB) 400W universal range power supply (100-240V, 50/60Hz)
- Made and optimized for the use with Simulink and xPC Target
- Highest quality and long-term supply
Resistivity 18.2Mohm.cm, production 3l/h, Smartpak DQ3, MilliPak.